Table of Content

• Featured Product From Plasti DIp
• Can Plasti Dip be applied to PVC?
• Get Creative with New Plasti Dip® Craft
• Looking for products in bulk?
• Can Plasti Dip be used to seal electrical connections?

Also, allow each coat to fully dry before applying more product. Mix thoroughly before each use and refill. Apply additional coats as needed. Use naphtha, xylene or toluene for cleanup.

Apply as many coats as desired. For best results, avoid direct sunlight, high humidity or breezy conditions. Plasti Dip Luxury Metal is a collection of nine luxurious, metallic colors styled after luxury vehicles. Each luscious color is infused with metallic specks, creating a cool, classy sparkle on anything you dip. Take your car from drab to fab and soak up the life of luxury.

Featured Product From Plasti DIp

Can of Clear Plasti Dip and five specially formulated tints, providing everything you need to create custom colors. For best coverage, use a combined total of at least one bottle of tint. Plasti Dip Glossifier adds a glossy shine and provides Fadebuster™ protection to any Plasti Dip color. With Plasti Dip Glossifier, you can give any Plasti Dipped item a glossy, polished look. We offer products for all projects, big and small. For bulk solutions, visit our professional site, Performix®.

However, it is not recommended that it be used on items that may be chewed or inserted into the mouth as it may present a choking hazard. Hold can 6-10” from surface, moving can back and forth slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.

Can Plasti Dip be applied to PVC?

Hold can 12-16” from surface, moving can back and forth slightly overlapping each stroke. Apply heavy enough to produce an even, wet appearance. To improve adhesion, apply Plasti Dip Primer on metal surfaces before applying Plasti Dip. Plasti Dip High Gloss Top Coat adds Fadebuster™ protection and a lustrous finish over any Plasti Dip color. Plasti Dip Glossifier adds Fadebuster™ protection and a glossy, polished shine over any Plasti Dip color. All surfaces to be coated must be free of oils, grease, dirt, wax, and loose rust.

Plasti Dip Satinizer adds Fadebuster™ protection to your Plasti Dip color while maintaining the satin luster of Plasti Dip color. Plasti Dip Pearlizer Enhancer will add a one-of-a-kind luster to any dried, cured Plasti Dip coating. It gives a pearlescent sheen and gleamy luster to any Plasti Dip color. Plasti Dip Metalizer Enhancer is a shimmering, metallic finish while letting the color of the Plasti Dip underneath show through. Shake can vigorously for one full minute after mixing ball begins to rattle. Avoid direct sunlight, high humidity, or breezy conditions.

Get Creative with New Plasti Dip® Craft

Plasti Dip Spray Clear may cause some dulling of finish when removed from calendered vinyl . If thinning is desired, product thickens, or for cleanup, use naptha, xylene , or toluene solvents. Keep container tightly closed when not in use. Plasti Dip Blaze is a unique collection of neon Plasti Dip colors that deliver eye-catching looks for any application.

If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, or direct sunlight. Ideal conditions are low humidity, 70 degrees, little to no air movement in a well-ventilated area. Yes, the Plasti Dip Enhancer in the Glossifier™ formulation provides a glossy finish on cured Plasti Dipped items.

PLASTI DIP®

Plasti Dip Enhancers are specially designed to make our already outstanding Plasti Dip Colors even better. Our Enhancers are easy to use and will give any Plasti Dipped item a unique look. Plasti Dip, whether in our original dip-on/brush-on formula or our aerosol variety, dries to a soft, satin finish. Use care when applying Plasti Dip Primer. Not intended for use with any other product.

Seller cannot control use of this product and will not accept liability for more than product replacement. Most items being dip coated do not require priming because the coating is shrinking around the item as it dries. However, in extreme conditions or when adding protective coating to a large metal surface, primer is recommended. Use Plasti Dip Primer or a high quality acrylic auto body-type primer. Do not use Rust-Oleum® primer as it is not compatible.

Can I add colorant to the Plasti Dip and make a custom color?

Mix Plasti Dip Spray thoroughly before each use and refilling of spray equipment. A dry coating thickness of 10 mils minimum is recommended for best performance and easy removal. Allow 4 hours cure time for each coat applied before using. Avoid excessive air movement, heat and humidity while applying.

Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem.

Use naphtha, xylene , or toluene for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip.

Rubber coating that provides electrical insulation to hard-to-reach places. Like electrical tape, but liquid. Manufacturers, Industrial Users/Professionals and Industrial Distributors, view our specialty coating products here. Plasti Dip does not contain any heavy metals, and when completely dry, is considered harmless.

Greater thickness might be necessary for aesthetic reasons or in extreme cases. Plasti Dip protective coating has a satin finish. If you are experiencing a cloudy or hazy finish, it’s likely caused by high humidity. Avoid these conditions or add approximately 5-10% naphtha to reduce the problem.